5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
very helpful, the information in these manuels are very detailed
Text excerpt from page 10 (click to view)
When the hob is first installed
1 Remove all packaging, both inside and outside the 3 When a cooking zone is switched on, it may hum
hob including the advertising labels and any protective film, before using the hob. briefly. This is a characteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance.
Hints and Tips on cooking and frying
Cookware
� You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible. � Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolourations on the ceramic glass surface which can be impossible to remove.
Energy saving
2 2 2 2
Always place cookware on the cooking zone before it is switched on. If possible, always place lids on the pans.
Switch cooking zones off before the end of the cooking time, to take advantage of residual heat. Bottom of pans and cooking zones should be the same size.